... but first, after turning the wing over, I had to finish up the wiring that I couldn’t access from the top with the top skin on. The first two pictures show the finished hook up in the bay with the power unit for the Aeroflash. The power and ground connections to the strobe power supply are permanent but the wire bundles will be redone when the strobe is mounted.
These two pictures show the remaining loose wires. Since the Aeroflash isn’t mounted yet, I haven’t made the final connections or routing. That will take place near the end of the build, when I install the fiberglass wing tip rib.
I have a number of small fiberglass jobs that will take place all at once, so I’m saving them for near the end of the build.