Click on picture to
view a larger image.
A couple of different views as the turtle deck starts to get covered in clecos.
      On to the LH former and its attach plate.
          Quite a forest of clecos in this view of the left hand corner.

          The second picture below is of a splice plate that attaches between the top of the two formers. It actually mounts behind, but I find it convenient for pilot drilling to reverse the pieces at fitting time.  In this case I can drill the pilot holes from the outside instead of in the tight quarters inside.  I move the piece to the inside after pilot drilling. I can do the updrilling from the outside as well now that the pilot holes show me where to drill.