Click on picture to
view a larger image.
With the bottom all riveted, I flipped the wing over and clecoed the leading edges skin in place with the top skin.  In these two pictures from the outboard end you can see the landing light etc, all tucked away inside the wing.
      In these two pictures from the inboard end you can see that I attached the aileron.  The flap hinge is on the bottom of the rear spar, and the aileron hinge is on the top edge.

      After attaching the Aileron, I leveled the wing and it is all ready to rivet.

      Also note that in the two pictures, the aileron is up in one and slightly down in the other.  Look at the control rod end at the bottom center of the picture and you will see that it has moved correspondingly!

      It feels really smooth with virtually no end play.  The top will have to wait until Saturday for its rivets.