Click on thumbnail
to view a larger image.
With the left wing put away the right wing is now on the table.  The first step is to level it and square it up. Which has started in the second picture.
      These two pictures show one of the steps of squaring up the wing. The line, at the top of the spar cap in the first picture, is the 0” reference line marked by the center of the reference hole below it.

      The second picture shows the line making the 19” station from the 0” line. The line is in the correct spot. It is supposed to be square with the center of the rear spar mounting hole that can be seen above in the small tab at the end of rear spar nearest the camera.

      This line becomes important for a few moments of panic that came a few minutes later in the build.