These are most of the parts for the main spar that I have to make.  They are various stiffeners and mounting surfaces.

In the first picture about 2/3rd of the pieces are cut to length.  The rest have compound cut ends so are only rough cut a little oversized.

    The next picture shows all pieces with a least one end cut. The large pieces in the front are the only pieces that don't have a finished end.

      The last picture shows all the pieces with both ends cut and all pieces are to length. Only the two pieces off the drawing are finished however (just with shaping, these and some of the other pieces require drilling of pilot or mounting holes).  The rest need at least one edge of the angle to be trimmed.

      The two large pieces still need some trimming but the angles are all cut.