Click on a picture to
view a larger image.

The first picture shows the start of putting parts away under the table. The second picture shows the arrangement of the parts under the table. On the floor, under the bottom shelf is all of my scrap wood from various projects. I have used a lot of it for making jigs, supports and various whatnots while building the plane.

The shelf has the two layers of wing and fuselage sheets and plate as can be seen in the second picture. Above that is all the angle and channel stock. I made another level out of the trimmed particle board stock and two by four scrap from the crate and set everything else on top of that. The leading edge skins are in the box on the left and all the control surfaces are in the box on the right.

I then inventoried the small flat pieces and arranged them in a box by part number. I also inventoried all of the welded steel pieces.